Received 05.08.2023
Revised 25.10.2023
Accepted 12.12.2023
Retrieved from Volume 27, No. 4, 2023
Pages 60 -70
Abstract
Sliding bearings with curved internal cylindrical surfaces have great potential and can play an important role in the repair and restoration of mechanisms of the agro-industrial complex. Since their use is becoming more and more common, there is a need to improve the design of such bearings to ensure their quality use and avoid errors in research on this issue, in addition, achieving better results in this area require significant financial investments to improve the efficiency of such mechanisms. The main goal of this work is to provide recommendations aimed at eliminating errors in the processes of improving and improving the quality of sliding bearings, as well as analyzing the functioning of machines used in the agro-industrial complex. An analytical method, a classification method, a functional method, a statistical method, and a synthesis method were used. In the course of the research, the peculiarities and differences of sliding bearings with curvilinear generators of the internal cylindrical surface were noted, errors and their causes, which are allowed during the improvement of agro-industrial mechanisms that ensure the development of the agricultural industry, were analyzed. It is important to analyze the functioning of these mechanisms in order to assess their effectiveness, development and complexity of work during the production of agricultural products. The issue of evaluating the performance of sliding bearings of this type, the expediency of using this element, their limitations during the process, the impact of limitations on the result was considered, and recommendations were proposed that would contribute to an effective mechanism for regulating the issue. It was determined that the use of sliding bearings of this type, in the process of restoring agro-industrial mechanisms, will ensure a significant increase in the productivity of these machines. The practical value of this work lies in the possibility of applying the obtained results to eliminate errors in the development and improvement of the mechanisms of the agro-industrial complex, studying the reliability of the use of sliding bearings in general, taking into account various factors, will provide a basis for recommendations on the appropriate use of these bearings
Keywords:
wedging; agricultural production; shaft; deformations; repair[1] Borysiuk, D.V., Tverdokhlib, I.V., Kupchuk, I.M., & Polievoda, Yu.A. (2023). Mathematical model of diagnosing the bearing assembly of the hub of steered bridges of wheeled tractors of traction class 1,4. Engineering, Energy, Transport AIC, 1(120), 14-20. doi: 10.37128/2520-6168-2023-1-2.
[2] Guo, A., Wang, X., Jin, J., Hua, D.Y., & Hua, Z. (2015). Experimental test of static and dynamic characteristics of tilting-pad thrust bearings. Advances in Mechanical Engineering, 7(7). doi: 10.1177/1687814015593878.
[3] Henry, Y., Bouyer, J., & Fillon, M. (2015). An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: A comparison with the untextured parallel surface configuration. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229(4), 362-375. doi: 10.1177/1350650114537484.
[4] Kindrachuk, M., Kharchenko, V., Humeniuk, I., & Leusenko, D. (2023). Influence of alloying the metal matrix on the anti-friction properties of eutectic coatings. Problems of Friction and Wear, 1(98), 63-69. doi: 10.18372/0370-2197.1(98).17360.
[5] Marchuk, R., & Mnatsakanov, R. (2023). Analysis of polymer composite materials for sliding bearings. Problems of Friction and Wear, 1(98), 55-62. doi: 10.18372/0370-2197.1(98).17359.
[6] Martins, D.H.C.S.S., de Lima, A.A., Pinto, M.F., Hemerly, D.D.O., Prego, T.D.M., e Silva, F. L., ... Haddad, D.B. (2023). Hybrid data augmentation method for combined failure recognition in rotating machines. Journal of Intelligent Manufacturing, 34(4), 1795-1813. doi: 10.1007/s10845-021-01873-1.
[7] Matviychuk, V.A., Gaidamak, O.L., & Karpiichuk, M.F. (2022). Prospects for creating surface layers of deta-leu with increased tribological characteristics using gas-dynamic filling. Engineering, Energy, Transport AIC, 1(116), 83-95. doi: 10.37128/2520-6168-2022-1-10.
[8] Mitra, M., Singha, N.R., & Chattopadhyay, P.K. (2023). Review on renewable energy potential and capacities of South Asian countries influencing sustainable environment: A comparative assessment. Sustainable Energy Technologies and Assessments, 57, 103295. doi: 10.1016/j.seta.2023.103295.
[9] Papadopoulos, C.I., Kaiktsis, L., & Fillon, M. (2014). Computational fluid dynamics thermohydrodynamic analysis of three-dimensional sector-pad thrust bearings with rectangular dimples. Journal of Tribology, 136(1), 011702. doi: 10.1115/1.4025245.
[10] Phiri, R., Rangappa, S.M., Siengchin, S., Oladijo, O.P., & Dhakal, H.N. (2023). Development of sustainable biopolymer-based composites for lightweight applications from agricultural waste biomass: A Review. Advanced Industrial and Engineering Polymer Research, 6(4), 436-450. doi: 10.1016/j.aiepr.2023.04.004.
[11] Pichler, J., Nothnangel, R.M., Besser, C., Pisarova, L., Dörr, N., Marchetti-Deschmann, M., & Frauscher, M. (2023). A comprehensive review of sustainable approaches for synthetic lubricant components. Green Chemistry Letters and Reviews, 16(1), 2185547. doi: 10.1080/17518253.2023.2185547.
[12] Soni, A., Das, P. K., Yusuf, M., Ridha, S., Kamyab, H., Chelliapan, S., ... Mussa, Z.H. (2023). Valorization of post-consumers plastics and agro-waste in sustainable polymeric composites for tribological applications. Waste and Biomass Valorization. doi: 10.1007/s12649-023-02103-w.
[13] Syrovatka, V. (2023). Obtaining composite powder materials and coatings based on titanium diboride. International Science Journal of Engineering & Agriculture, 2(3), 10-17. doi: 10.46299/j.isjea.20230203.02.
[14] Terra, I.C.D.C., Batista, F.G., Silva, D.W., Scatolino, M.V., Júnior, F.T.A., Martins, M.A., & Mendes, L.M. (2023). Mining waste and coconut fibers as an eco-friendly reinforcement for the production of concrete blocks. Environmental Science and Pollution Research, 30, 62641-62652. doi: 10.1007/s11356-023-26493-5.
[15] Vinod, B., Suresh, S., Reddy, S.S.K., & Sujith, K.S. (2023). Tribological and mechanical characteristics of Mg-Zn6.0-Y1.2-Zr0.2 alloy by SPS technique: Natural and agro-waste utilization. Journal of Bio-and Tribo-Corrosion, 9, 5. doi: 10.1007/s40735-022-00728-3.
[16] Wadhwa, A.S., & Chauhan, A. (2023). An overview of the mechanical and tribological characteristics of non-ferrous metal matrix composites for advanced engineering applications. Tribology in Industry, 45(1), 51-80. doi: 10.24874/ti.1359.08.22.12.
[17] Woo, S., O’Neal, D.L., Hassen, Y.M., & Mebrahtu, G. (2023). Enhancing the fatigue design of mechanical systems such as refrigerator to reserve food in agroindustry for the circular economy. Sustainability, 15(8), 7010. doi: 10.3390/su15087010.
[18] Xu, A., Darbandi, M., Javaheri, D., Navimipour, N.J., Yalcin, S., & Salameh, A.A. (2023). The management of IoT-based organizational and industrial digitalization using machine learning methods. Sustainability, 15(7), 5932. doi: 10.3390/su15075932.
[19] Yeromenko, O.V., Yeriomina, Ye.A., & Tomina, A.-M. (2023). Supply of operation modes on tribological power to basaltoplastics based on polytetafluororetylene. Mathematical Modeling, 1(48), 48-55. doi: 10.31319/2519-8106.1(48)2023.280072.
[20] Zhang, W., & Zhu, B. (2023). Optimization design for slip/no-slip configuration of hydrophobic sliding bearings using Monte Carlo search. Tribology International, 178(A), 108034. doi: 10.1016/j.triboint.2022.108034.